URM-60CB-PP

For Metallized Film Capacitor

INTRODUCTION

Two mandrels rotating to assure short cycle time.
Tension controlled by DC servomotor; main winding by AC servomotor.
The outside seal uses the digit display PID control (PID control ±1%
Process control system by IPC 586 computer, with hard disk to memorize 600 sets of specification,easy to change production specification.
It has 3.5” disk driver, which is able to correct process and backup them.
Automatic indication function for self-examining breakdown. When machine breakdown, it can self-testing
to find reason and show the situation on the screen. It’s able to indicate the inspection and repairable methods.
Speed up/down rate setting functions, excellent for high current, high voltage and interference suppressors class X2 capacitor.
With electronic burn off control system, speed adjustable and suitable for Al. or Zinc/Al. metallized layer, the de-metallizing effect is very good.
Main winding up to 9000 R.P.M
With prepress structure, the element will be received and press by the unloading unit after the winding
Metallized film and PP/PE material reels are equipped tracing roller. As the material’s OD changes, the
position of tracing roller will be changed too. They won’t touch the material.
It could select to use cover film function or not by program control.
Air cylinder of low friction for dancer rollers and pressure roller with hand adjustment.

Mandrel Size		f 3, 4, 5, 6,7,8mm
Metal Film	Thickness	Min. 3mm
	ID	f75mm
	OID	f240mm
	Dual Winding	8～27mm
	Single Winding	8～50mm
Al. Foil Burn Off	Thickness	20mm ’ 60mm
	ID	f 38～40mm
	OD	f150mm
	Number	2 sets
Element Size (OD)		Max. f28mm
Element Size (OD)		Max. 9000 R.P.M.
Capacitance Control		Turns Controlled
Memory Store		600 sets
Sequential Control		I.P.C. Controlled
Tension Control		DC Servo Motor Controlled
Seal Winding		Digit Display, PID Controlled ±1%
Power Source		AC220V 1f 50/60Hz, 1.5 KVA
Air Pressure		5 kg/cm2
Machine Size		L1050mm ’ D950mm ’ H1780mm
Machine Weight		About 500 KGS

DISPLAY SCREEN