URM-804
For Metallized Film Capacitor
- Two mandrels rotating to assure short cycle time, production capacity is increased highly.It could wind two elements in the same time.
- Equipped with 8 sets of material reels, tension controlled by DC servo motor.
- Main winding by AC servomotor, speed stably, long life.
- There is winding turns setting control, the winding turns will be very precise.
- The outside seal uses the digit display PID control (PID control ±1%). The products have good appearance.
- Process control system by IPC 586 computer, with hard disk to memorize 600 sets of specification, easy to change production specification.
- It has 3.5” disk driver, which is able to correct process and backup them.
- With capacitance calculating function, the user only input parameter such as material, capacitance, the machine will calculate the winding turns automatically.
- Dual pressure roller, elements will be sturdy, reduce the AC noise.
| Mandrel Size | f 2.5, 3, 4, 5, 6 mm | |
| Metal Film | Thickness | Min. 6mm |
| OD | f200mm | |
| ID | f75mm | |
| 4 Reels | 8 ~ 14 mm | |
| Al. Foil Burn Off | Thickness | Min. 20μm |
| OD | f150mm | |
| ID | f 40mm | |
| Quantity | 2 sets | |
| Capacitance Control | Turns Controlled | |
| Memory Quantity | 600 sets | |
| Sequential Control | I.P.C. Controlled | |
| Tension Control | DC Servo Motor Controlled | |
| Seal Winding | Digit Display, PID Controlled ±1% | |
| Power Source | AC 220V 1f 50/60Hz 1.5KVA | |
| Air Pressure | 5 kg/cm2 | |
| Winding Speed | Max. 9000 R.P.M. | |
| Machine Size | L 1200mm ’ D 950mm ’ H 1780mm | |
| Machine Weight | About 550 kgs | |
