 |
AUTOMATIC WINDING MACHINE - For Metallized Film Capacitor |
URM-804 |
 |
FEATURE |
 |
- Two mandrels rotating to assure short cycle time, production capacity is increased highly.It could wind two elements in the same time.
- Equipped with 8 sets of material reels, tension controlled by DC servo motor.
- Main winding by AC servomotor, speed stably, long life.
- There is winding turns setting control, the winding turns will be very precise.
- The outside seal uses the digit display PID control (PID control ±1%). The products have good appearance.
- Process control system by IPC 586 computer, with hard disk to memorize 600 sets of specification, easy to change production specification.
- It has 3.5” disk driver, which is able to correct process and backup them.
- With capacitance calculating function, the user only input parameter such as material, capacitance, the machine will calculate the winding turns automatically.
- Dual pressure roller, elements will be sturdy, reduce the AC noise.
|
SPECIFICATION |
|
Mandrel Size |
f 2.5, 3, 4, 5, 6 mm |
Metal Film |
Thickness |
Min. 6mm |
OD |
f200mm |
ID |
f75mm |
4 Reels |
8 ~ 14 mm |
Al. Foil Burn Off |
Thickness |
Min. 20μm |
OD |
f150mm |
ID |
f 40mm |
Quantity |
2 sets |
Capacitance Control |
Turns Controlled |
Memory Quantity |
600 sets |
Sequential Control |
I.P.C. Controlled |
Tension Control |
DC Servo Motor Controlled |
Seal Winding |
Digit Display, PID Controlled ±1% |
Power Source |
AC 220V 1f 50/60Hz 1.5KVA |
Air Pressure |
5 kg/cm2 |
Winding Speed |
Max. 9000 R.P.M. |
Machine Size |
L 1200mm ’ D 950mm ’ H 1780mm |
Machine Weight |
About 550 kgs |
|
