 |
AUTOMATIC LEAD WIRE WELDING MACHINE |
LDS-100 |
 |
INTRODUCTION |
 |
This Automatic Welding Machine is particularly designed for making series-sport welds plastic film capacitors to lead wire permitting auto- matic operations including feeding, welding, photo sensor and automatic cam control of capacitor and lead wire. It can provide lead wire and elements of act exactly.
|
FEATURE |
|
 Machinery transmission adopts cam driver, action precise, operation easy.
Main driver uses Ac conversion controller, could stepless adjust speed.
Process control adopts (P.L.C.), easy install, operate and maintain.
Welding unit uses power source compensation and up slope control welding current stable.
Relation of Power Source Voltage and Welding Current: |
Compensating loop circuit
of power source voltage:
In welding condition, may be welding current will transform as power source voltage.
The compensating loop circuit
can make welding current stabl |
Comparison of with and without up slope control: |
Up slope control:
Welding parts would be suited by up slope control, and beginning press time will be reduced. |
|
SPECIFICATION |
|
ELEMENT TYPE |
Plate Type |
LEAD WIRE TYPE |
CP Wire |
RATED PRIMARY VOLTAGE |
AC 220V 1f2W |
RATED FREQUENCY |
50Hz / 60 Hz |
RATED CAPACITY |
5 KVA |
MAX. INPUT |
8 KVA (50Hz), 9 KVA (60Hz) |
MAX. WELD CURRENT |
1500 x 2A |
CURRENT ADJUSTMENT |
0~99.9% |
SPEED |
60~80 pcs/Minute |
WELD TIME |
1~99 Cycle |
UP SLOPE |
0~9 Cycle |
MACHINE SIZE |
L 1600 ¡¦ D1000 ¡¦ H1150 mm |
MACHINE WEIGHT |
About 600 KGS |
|
WELDING SIZE |
|
SIZE
(mm) |
L
¡Ó0.3 |
H
¡Ó0.3 |
T
¡Ó0.3 |
F
¡Ó0.3 |
dØ |
Min. |
10 |
6 |
2.5 |
30 |
AWG#22
0.64mm |
Max. |
28 |
18 |
10 |
56 |
AWG#18
1.02mm |
Note: Dimension ¡§L¡¨ should be 1.5mm or more greater than ¡§H¡¨ |
 |
|
CONTROL |
|
It uses digital control with compensating loop circuit of power source voltage and up slope control.
|
DRIVING |
|
It is used AC motor to control frequency conversion, the rotation speed smooth, reliable and adjustable
|
Q.C. MONITOR |
|
- PHOTO MASTER
It will be automatically stopped while there is no element.
- JAM AUTOMATIC CONTROL
On the running, if the machine is out of control due to the error of other factors, Jam Automatic Control
should automatically stop it.
Remarks: We reserve the right to modify the above specification at any time.
|
