|
 |
Slitter/Re-Winder |
F-3590A-G |
|
 |
- This series are suitable to produce Non-inductive Foil /Polyester Film or Polypropylene Film capacitors.
It could be dual winding or series type of high voltage capacitors.
- IPC 486computer control system, the circuit clear, full function, it can store 600 sets different winding specification, if winding materials are the same, changing spec. only needs 2 seconds.
- The input and output use the electronic switch, the rate of break-down is very low.
- Main winding uses servo motor control, winding speed stable, long life.
- One set of winding mandrel, which easy to change specification and maintenance. The capacitance different tolerance will be very small.
- The inside and outside seals both use the digit display PID control. The products have good appearance.
- The DC servo motor control tension of 8 material feeding, ensure the element quality stable.
|
|
| |
 |
Element |
Dia. |
Max.f35mm |
Size |
Length |
Max.40mm’2 |
|
Max.80mm’1 |
Mandrel |
f4, 5, 6, 8mm |
Effective Mandrel |
90mm |
Number of Reel |
10 Reels |
Foil |
Width |
Max.38mm’2 |
Max.78mm’1 |
Thickness |
5 ~10um |
ID |
40mm |
OD |
150mm |
Film |
Width |
Max.38mm’2 |
Max.78mm’1 |
hickness |
Min.3.5um |
ID |
40mm |
OD |
160mm |
Suitable Specification |
Larger & Series |
Tension Control |
AC Servo Motor |
Seal System |
Digit Display, PID Control ± 1% |
Winding Turns |
Max. 9999 |
Cutting Foil |
Perforation |
Winding Speed |
Max. 4500 R.P.M |
Power Source |
AC220V 50/60Hz 1f 2.5KVA |
Air Pressure |
5Kg/cm2 |
Machine Dimension |
W 1200mm ’ D 950mm ’ H 1780mm |
Machine Weight |
About 500 Kgs |
|
|
