|
 |
Slitter/Re-Winder |
|
|
 |
- This machine is designed to cope with precise requirements of thin films such as Copper foil, Al. foil¡Ketc.
- Rigid frame -- Both side panels are assembled with the base on heavy steel, assure tram and vibration free operation.
- Driven system -- AC SERVER motor with tacho-generator, and transmit by timing belt, It includes functions
as soft start, soft stop, emergency stop. All controls are located on control panel in the front of machine.
- Unwind tension control -- Equipped with powder brake and automatic tension controller to get the optimum
tension on unwind side at high speed.
- Rewind tension control -- Equipped with auto tension control LOAD CELL and Air-Friction Shaft.
- Web guide system --Edge position controller to guarantee the slitting margin very accurate in the range of ¡Ó0.1mm.
- Rewind arm -- Equipped with Air-Friction Shaft.
- Knife System -- Equipped with GANG CUT and SHEAR CUT system, it was designed by cassette, so it
can be shifted easy.
- Edge waste trimming -- By united axle rewind.
- Easy maintenance -- Hinge-out electric for easy maintenance.
- Special design of any width slitting is available.
|
|
| |
 |
 Web: 1/3~1 OZ pure Cu or compound Film 20~180um
Unwind Width: 650mm
Unwind Diameter: Max. £X500mm
Unwind Core I.D.: £X76/152mm
Rewind Diameter: Max. £X250mm
Rewind Core I.D.: £X76mm
Slit Width: 250mm
Machine Speed: 50M/min
Running Speed: Depending on material quality and slitting width to be processed.
Unwind and Rewind: By Different Side.
Operation Panel: Touch Control Monitor
Power: AC 380V 50Hz 3£X 4w
Air Supply: 5 Kg/cm2
Machine Size: (L) 1800 x (D) 1900 x (H) 1450 mm
Ground Base |
1 set |
Flank Plate |
2 pcs |
Main Transmission AC ServoMotor(Japanese 2KW). |
1 pc |
Motor Control System (Japanese) |
1 set |
Main Transmission Roller |
1 pc |
Nip Roller |
1 set |
Meter Counter |
1 set |
PLC |
1 set |
Air System (Japanese) |
1 set |
Operation Control Box |
1 pc |
 |
GANG CUT System, Including:
Interval Ring of Surface Hardened (250mm) |
2 pcs |
Interval Ring of Sealing Glue (250mm) |
2 pcs |
| Upper and Lower Knife |
total 6 pcs |
Knife Base |
1 set |
Brush Cleaner for Dust |
1 set |
|
| |
|
 |
SHEAR CUT System, Including:
| Upper Knife Shaft |
1 pc |
| Lower Knife Shaft |
1 pc |
| Upper Knife |
3 pcs |
| Fixed Ring of Upper Knife |
3 sets |
| Lower Knife |
3 pcs |
| Interval Ring of Lower Knife |
2 sets |
| Knife Base |
1 set |
| Fixed Base of Knife Shaft |
2 sets |
|
Shaftless Unwind Unit (with 3¡¨/6¡¨ clasp) |
1 set |
Powder Brake 5kg-M (Japanese) |
1 set |
LOAD CELL (Germany E+L) |
1 pc |
EPC (Germany E+L) |
1 set |
Auto Tension Control System (Germany E+L) |
1 set |
Adjustment Roller for Material Thickness |
1 set |
Pressure Roller |
1 set |
Material Connecting Unit (Manual type with pressure stick) |
1 set |
Rewind AC Servo Motor (Japanese 2KW) |
1 pc |
|
Motor Control System (Japanese) |
1 set |
O.D. Check Control System |
2 sets |
Tracing Roller Control System |
2 sets |
Tracing Roller Motor (60W). |
1 set |
Tracing Roller |
2 pcs |
Air-Friction Shaft (3¡¨) |
2 pcs |
Air Adapter |
2 pcs |
Auto Tension Controller (Germany E+L) |
1 set |
| E-P Hyreg (Japanese SMC) |
2 sets |
Rewind Safe Lock |
2 sets |
|
|
